To receive a hand or a foot accurate to pour Plaster, you will need a mold from alginate.
Alginate, for example. at the dentist used to abzuformen teeth. Alginate is skin-friendly, since it is from algae is produced.
At best it is order. Alginate need for setting approximately 2-5 minutes, and then remains elastic and rubbery. Hands and feet can without dividing resources in alginate and dipped after setting out carefully considered. Alginatformen can usually be used only once, because after the alginate Gipsgießen destroyed and sensitive.
To make a mold, you need first a receptacle into which you hand to plunge joints, eg plastic bowl or large beverage packaging. After touch of the alginate with cold water and after packing instruction is the container filled with alginate. Now it appears timely to the hand joints into the vessel into it, after about 1 minute Mass begins with the setting on. After about 2-5 minutes, the hardened mass, the hand must now carefully from the mold can be drawn. After cleaning the mold with water, it can now be filled with plaster. If the plaster hardened, the Alginatform piecewise broken, finished the plaster cast.
Photos and further instructions are available at the following links:
http://www.la-gum.de/algifix/algifix_alginat_anleitung_hand.htm
Source: www.la-gum.de
http://www.lutgen.lu/abgussalginathand.htm
Source: www.lutgen.lu
http://www.lutgen.lu/abdruckalginathand.htm
Source: www.lutgen.lu
http://de.wikipedia.org/wiki/Alginsäure
Source: wikipedia.de
Recent Comments